Load data for .30 PICRA + .308 | 147gr | CamPro FMJ BT

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 147gr \| CamPro FMJ BT
Bullet Weight:	147gr \| 9.5g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.150" \| 29.2mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.269" \| 6.8mm
Shank Seated Depth:	0.114" \| 2.9mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B10014_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 56 loads in caliber .30 PICRA with .308 | 147gr | CamPro FMJ BT bullet and 28 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	34737	86%	**66	100%
ADI APS 450	<<locked>>	64%	36085	89%	**53	100%
Accurate 4100	<<locked>>	75%	35273	87%	**48	90%
[Accurate No. 11 FS]*	<<locked>>	85%	36303	89%	**75	83%
Accurate No. 9	<<locked>>	65%	36289	89%	**55	96%
Accurate TCM	<<locked>>	63%	34418	85%	**22	96%
Alliant 2400	<<locked>>	72%	36158	89%	**68	93%
Alliant BLUE DOT	<<locked>>	74%	35201	87%	**35	98%
[Hodgdon H110]*	<<locked>>	80%	35505	87%	**91	87%
Hodgdon LilGun	<<locked>>	81%	35244	87%	**17	93%
Hodgdon TrailBoss	<<locked>>	97%	24801	61%	**8	100%
Lovex D037.2	<<locked>>	64%	36289	89%	**55	96%
Maxam CSB 1	<<locked>>	64%	34069	84%	**15	100%
Ramshot Enforcer	<<locked>>	71%	35056	86%	**62	94%
ReloadSwiss RS 14	<<locked>>	95%	23308	57%	**5	100%
[ReloadSwiss RS 30]*	<<locked>>	96%	35143	87%	**04	89%
Rottweil P 806	<<locked>>	63%	35360	87%	**93	100%
SNPE Vectan A0	<<locked>>	64%	34925	86%	**61	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	33533	83%	**32	95%
SNPE Vectan BA7 1/2	<<locked>>	68%	35259	87%	**30	100%
Shooters World Heavy Pistol	<<locked>>	64%	36289	89%	**55	96%
[Somchem S265]*	<<locked>>	87%	35041	86%	**32	85%
Vihtavuori 3N38	<<locked>>	69%	34577	85%	**93	100%
Vihtavuori N105	<<locked>>	74%	36405	90%	**39	100%
Vihtavuori N110	<<locked>>	89%	34824	86%	**71	93%
Vihtavuori N32C Tin Star	<<locked>>	79%	35201	87%	**37	100%
Vihtavuori N350	<<locked>>	64%	34650	85%	**24	100%
[Winchester 296]*	<<locked>>	80%	36216	89%	**11	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	24903	61%	**19	100%
ADI APS 450	<<locked>>	61%	33460	82%	**27	100%
[Accurate 4100]*	<<locked>>	61%	22727	56%	**29	81%
[Accurate No. 11 FS]*	<<locked>>	81%	32735	81%	**25	81%
Accurate No. 9	<<locked>>	61%	32605	80%	**99	94%
Accurate TCM	<<locked>>	61%	32576	80%	**93	95%
[Alliant 2400]*	<<locked>>	61%	25686	63%	**88	87%
Alliant BLUE DOT	<<locked>>	61%	24569	61%	**52	94%
[Hodgdon H110]*	<<locked>>	70%	26078	64%	**27	80%
[Hodgdon LilGun]*	<<locked>>	64%	19711	49%	**25	81%
Hodgdon TrailBoss	<<locked>>	61%	13242	33%	**5	100%
Lovex D037.2	<<locked>>	61%	32605	80%	**99	94%
Maxam CSB 1	<<locked>>	61%	31763	78%	**86	100%
[Ramshot Enforcer]*	<<locked>>	61%	24889	61%	**91	88%
ReloadSwiss RS 14	<<locked>>	60%	12502	31%	**8	100%
[ReloadSwiss RS 30]*	<<locked>>	83%	24337	60%	**98	81%
Rottweil P 806	<<locked>>	61%	33199	82%	**63	100%
SNPE Vectan A0	<<locked>>	61%	32561	80%	**38	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	69%	16360	40%	**1	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	28964	71%	**42	100%
Shooters World Heavy Pistol	<<locked>>	61%	32605	80%	**99	94%
[Somchem S265]*	<<locked>>	77%	27195	67%	**98	80%
Vihtavuori 3N38	<<locked>>	61%	26905	66%	**71	98%
Vihtavuori N105	<<locked>>	61%	23888	59%	**52	99%
[Vihtavuori N110]*	<<locked>>	67%	18101	45%	**53	80%
Vihtavuori N32C Tin Star	<<locked>>	62%	24424	60%	**2	100%
Vihtavuori N350	<<locked>>	61%	32242	79%	**94	100%
[Winchester 296]*	<<locked>>	77%	32213	79%	**55	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.